Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
Andy McMillan’s 2016 Ford Focus RS Mk3 is a blue 2.3-litre car, owned after a Focus ST-3 estate, upgraded with the Mountune FPM375 package. The upgrade costs roughly £1,000 and, according to the owner, gives a stronger response under acceleration, though the owner questions its value.Andy McMillan moved from a Focus ST-3 estate to this blue 2.3-litre RS. In his PistonHeads diary he documented the Mountune FPM375 upgrade from booking the work through to driving the finished car.Andy’s blue Focus RS parked outside. Andy McMillan via PistonHeads, reproduced with permission. Original photo post.
Engine and powerThe Mountune FPM375 package was installed by Harrisons of Peebles during a service. The kit comprises:air filter;alloy crossover duct;silicone hoses;uprated recirculation valve;revised calibration.ResultsThe owner reports a stronger response under acceleration (subjective, single-owner impression). No measured figures are given.Build updatesHarrisons of Peebles installed the package during a service. The kit included an air filter, alloy crossover duct, silicone hoses, an uprated recirculation valve and revised calibration. Andy reported a stronger response under acceleration, though he questioned the value of the roughly £1,000 upgrade. Later ownership posts show the RS after further use.The RS in Andy’s later ownership update. Andy McMillan via PistonHeads, reproduced with permission. Original photo post.
SourcesPistonHeads build thread: original build post and Mountune kit contentsPistonHeads build thread: installation and owner’s driving impressionsPistonHeads build thread: later ownership update and photographOriginal postsOriginal build post and Mountune kit contentsInstallation and owner’s driving impressionsLater ownership update and photograph
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Andy McMillan’s 2016 Ford Focus RS Mk3 FPM375
Andy McMillan moved from a Focus ST-3 estate to this blue 2.3-litre RS. In his PistonHeads diary he documented the Mountune FPM375 upgrade from booking the work through to driving the finished car.

Andy’s blue Focus RS parked outside. Andy McMillan via PistonHeads, reproduced with permission. Original photo post.
Build updates
Harrisons of Peebles installed the package during a service. The kit included an air filter, alloy crossover duct, silicone hoses, an uprated recirculation valve and revised calibration. Andy reported a stronger response under acceleration, though he questioned the value of the roughly £1,000 upgrade. Later ownership posts show the RS after further use.

The RS in Andy’s later ownership update. Andy McMillan via PistonHeads, reproduced with permission. Original photo post.
Original posts
Revision 2: Andy McMillan’s 2016 Ford Focus RS Mk3 FPM375
Andy McMillan’s 2016 Ford Focus RS Mk3 is a blue 2.3-litre car, owned after a Focus ST-3 estate, upgraded with the Mountune FPM375 package. The upgrade costs roughly £1,000 and, according to the owner, gives a stronger response under acceleration, though the owner questions its value.

Andy’s blue Focus RS parked outside. Andy McMillan via PistonHeads, reproduced with permission. Original photo post.
Engine and power
The Mountune FPM375 package was installed by Harrisons of Peebles during a service. The kit comprises:
- air filter;
- alloy crossover duct;
- silicone hoses;
- uprated recirculation valve;
- revised calibration.
Results
The owner reports a stronger response under acceleration (subjective, single-owner impression). No measured figures are given.

The RS in Andy’s later ownership update. Andy McMillan via PistonHeads, reproduced with permission. Original photo post.
Sources