Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Ford

Changes from revision 1 to revision 3

Removed text is struck through; added text is highlighted.

Triple_X's "Mean Green" is a 2010 2.5-litre Ford Focus RS Mk2 bought in August 2012. It runs 18 × 8.5-inch Rota Grid wheels, a Mountune airbox, a three-inch Mongoose exhaust and H&R lowering springs. The owner's final specification gives 360 metric hp and 510 Nm after mapping (owner-reported, no dyno sheet on the page).Triple_X bought this 2.5-litre RS in August 2012 and opened the build diary by fitting 18 × 8.5-inch Rota Grids. The owner later added 3 mm rear spacers to bring the wheels closer to the arch edges.

Mean Green viewed from the front quarter. Triple_X on Garaget, reproduced with permission. Original photo post.

WheelsThe first modification was a set of 18 × 8.5-inch Rota Grids. 3 mm rear spacers were added later to bring the wheels closer to the arch edges.Build updatesThe next changes are dated in the thread. In December, Triple_X documented the Mountune airbox, K&N X-Stream filter and stainless charge pipe. On 5 May 2013 the owner confirmed the three-inch Mongoose exhaust, downpipe and Forge dump valve were on the car. Five days later the H&R springs were fitted, lowering the front by 35 mm and the rear by 25 mm. The final owner specification records 360 metric hp and 510 Nm after mapping.

Rear three-quarter view showing the wheel fitment. Triple_X on Garaget, reproduced with permission. Original photo post.

Intake, exhaust and powerIn December 2012 the intake gained a Mountune airbox, K&N X-Stream filter and stainless charge pipe. By 5 May 2013 the car carried a three-inch Mongoose exhaust, downpipe and Forge dump valve. The final owner specification records 360 metric hp and 510 Nm after mapping.SuspensionH&R springs were fitted on about 10 May 2013, with the owner measuring a drop of 35 mm at the front and 25 mm at the rear (owner-measured).SourcesGaraget build thread: opening postGaraget build thread: Rota wheel installationGaraget build thread: intake componentsGaraget build thread: exhaust and dump-valve installationGaraget build thread: spring installation and measured drop reported by the ownerGaraget car page: owner's specification and photo galleryOriginal postsOpening build postRota wheel installationIntake componentsExhaust and dump-valve installationSpring installation and measured drop reported by the ownerOwner’s specification and photo gallery

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Triple_X’s 2010 Ford Focus RS Mk2 “Mean Green”

Triple_X bought this 2.5-litre RS in August 2012 and opened the build diary by fitting 18 × 8.5-inch Rota Grids. The owner later added 3 mm rear spacers to bring the wheels closer to the arch edges.

Mean Green viewed from the front quarter

Mean Green viewed from the front quarter. Triple_X on Garaget, reproduced with permission. Original photo post.

Build updates

The next changes are dated in the thread. In December, Triple_X documented the Mountune airbox, K&N X-Stream filter and stainless charge pipe. On 5 May 2013 the owner confirmed the three-inch Mongoose exhaust, downpipe and Forge dump valve were on the car. Five days later the H&R springs were fitted, lowering the front by 35 mm and the rear by 25 mm. The final owner specification records 360 metric hp and 510 Nm after mapping.

Rear three-quarter view showing the wheel fitment

Rear three-quarter view showing the wheel fitment. Triple_X on Garaget, reproduced with permission. Original photo post.

Original posts

Revision 3: Triple_X’s 2010 Ford Focus RS Mk2 “Mean Green”

Triple_X's "Mean Green" is a 2010 2.5-litre Ford Focus RS Mk2 bought in August 2012. It runs 18 × 8.5-inch Rota Grid wheels, a Mountune airbox, a three-inch Mongoose exhaust and H&R lowering springs. The owner's final specification gives 360 metric hp and 510 Nm after mapping (owner-reported, no dyno sheet on the page).

Mean Green viewed from the front quarter

Mean Green viewed from the front quarter. Triple_X on Garaget, reproduced with permission. Original photo post.

Wheels

The first modification was a set of 18 × 8.5-inch Rota Grids. 3 mm rear spacers were added later to bring the wheels closer to the arch edges.

Rear three-quarter view showing the wheel fitment

Rear three-quarter view showing the wheel fitment. Triple_X on Garaget, reproduced with permission. Original photo post.

Intake, exhaust and power

In December 2012 the intake gained a Mountune airbox, K&N X-Stream filter and stainless charge pipe. By 5 May 2013 the car carried a three-inch Mongoose exhaust, downpipe and Forge dump valve. The final owner specification records 360 metric hp and 510 Nm after mapping.

Suspension

H&R springs were fitted on about 10 May 2013, with the owner measuring a drop of 35 mm at the front and 25 mm at the rear (owner-measured).

Sources