Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Vauxhall

Matteo’s yellow VX220 started as a standard, right-hand-drive 2.2-litre car from England. His 2013 build diary opens with photographs of the car at 31,000 miles. He and his colleagues at LM Corse converted it to left-hand drive. Matteo’s build diary and conversion notes

Matteo’s VX220 as acquired, showing the yellow bodywork, original cockpit and engine bay

From the early dyno run to the Eaton M62

The August 2012 dyno sheet records 110.5 kW and 211.3 Nm. Matteo later fitted an Eaton M62 supercharger to the Z22SE, with a separate water-to-air charge-cooling circuit. In his 2015 specification he reported 265 CV at 6,800 rpm and 296 Nm at 3,900 rpm. Matteo’s Eaton engine specification

August 2012 dyno sheet from Matteo’s early build, before the supercharger conversion

The car ran GAZ Gold Pro suspension and 17-inch MAK XLR wheels. Matteo also documented the dashboard conversion, heater-box rebuild and carbon-fibre trim. Original fabrication photos and chassis modifications

Front bodywork removed and dashboard and heater components on Matteo’s workbench

Later Harrop conversion

In 2019, Dalla_31 identified the same Lightning Edition by its original UK registration. This later specification paired a Harrop HTV1320 with forged pistons, Eagle rods, 635 cc injectors and a Quaife limited-slip differential. Dalla_31 reported 320 CV at 7,000 rpm and 360 Nm at 3,900 rpm. Dalla_31’s Harrop build specification

Photographs and early dyno sheet from Matteo VX220’s Lotus and Light Cars Club build thread, reproduced with permission. Original photo post