Botacco moved from a Tourneo Connect to a larger Tourneo Custom to make room for a camper interior. He wanted to be able to take the furniture out in half an hour and to install it without drilling the body. He made the side cabinet from 15 mm plywood, secured it at floor level with a seat-rail fixing, and left a 50 cm passage at the right-hand exit. Design brief, wheel choice and cabinet construction

Sleeping and kitchen layout
A second bench slides under the main bench when the bed is stowed, freeing space for storage. In his next update Botacco had finished the bed, hung the cabinet doors and fitted the sink, tap and pump. Owner’s bench-bed and kitchen update
Roof-mounted solar
Botacco later fitted a 210 W CV210 photovoltaic panel and a Victron BlueSolar controller with a Bluetooth interface. The overhead photo shows the panel’s position on the roof. Completed solar installation · Dedicated solar build post

Photographs by botacco on IDAF, reproduced with permission. Interior construction photos · Solar installation photos