Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
This is a Swedish rear-wheel-drive 1990 Ford Sierra Cosworth with a rebuilt turbo engine and an E36 BMW M3 six-speed gearbox. The owner, Micke (Majkey on PassionFord), bought it in 2009. He reports 500 bhp and 505 Nm with a GTX3076 turbo and TG exhaust manifold, after an earlier 472 bhp with a Precision SC5862 (owner-reported figures).Micke, who posts as Majkey on PassionFord, bought the Sierra in 2009. Blue exhaust smoke prompted an engine rebuild with his friend Putte. Micke reported 472 bhp with a Precision SC5862, then 500 bhp and 505 Nm after switching to a GTX3076 and TG exhaust manifold. Micke’s illustrated build history and power figuresEngineBlue exhaust smoke prompted an engine rebuild by the owner and his friend Putte. The rebuild used CP pistons, Verdi rods, a CNC-ported head and a BD16+ inlet cam. A Vi-Pec V44 controls the engine with 990 cc injectors.Engine and drivelineThe rebuild used CP pistons, Verdi rods, a CNC-ported head and a BD16+ inlet cam. A Vi-Pec V44 controlled the engine with 990 cc injectors. Micke and Putte adapted an E36 M3 six-speed gearbox, and the Sierra gained a Quaife differential and hydraulic clutch. Gearbox and clutch installation notes · Owner’s specification and photo galleryPower figuresThe owner reported 472 bhp with a Precision SC5862, then 500 bhp and 505 Nm after switching to a GTX3076 and TG exhaust manifold. These are owner-reported. The separate dyno graph was identified by the owner as wheel horsepower, and he corrected the turbo designation printed on it.TransmissionAn E36 M3 six-speed gearbox was adapted to the Sierra, which also gained a Quaife differential and a hydraulic clutch.Photographs from Maikey’s Garaget gallery, reproduced with permission. Original gallerySourcesPassionFord build thread: illustrated build history and power figuresPassionFord build thread: gearbox and clutch installation notesPassionFord build thread: dyno-sheet correctionGaraget entry: specification and photo gallerySwedish build diary on Skogen Racing forumMicke identified the separate dyno graph as wheel horsepower and corrected the turbo designation printed on it. Owner’s dyno-sheet correctionPhotographs from Maikey’s Garaget gallery, reproduced with permission. Original gallery · Micke’s Swedish build diary
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Majkey’s six-speed 1990 Ford Sierra Cosworth
Micke, who posts as Majkey on PassionFord, bought the Sierra in 2009. Blue exhaust smoke prompted an engine rebuild with his friend Putte. Micke reported 472 bhp with a Precision SC5862, then 500 bhp and 505 Nm after switching to a GTX3076 and TG exhaust manifold. Micke’s illustrated build history and power figures

Engine and driveline
The rebuild used CP pistons, Verdi rods, a CNC-ported head and a BD16+ inlet cam. A Vi-Pec V44 controlled the engine with 990 cc injectors. Micke and Putte adapted an E36 M3 six-speed gearbox, and the Sierra gained a Quaife differential and hydraulic clutch. Gearbox and clutch installation notes · Owner’s specification and photo gallery

Micke identified the separate dyno graph as wheel horsepower and corrected the turbo designation printed on it. Owner’s dyno-sheet correction
Photographs from Maikey’s Garaget gallery, reproduced with permission. Original gallery · Micke’s Swedish build diary
Revision 2: Majkey’s six-speed 1990 Ford Sierra Cosworth
This is a Swedish rear-wheel-drive 1990 Ford Sierra Cosworth with a rebuilt turbo engine and an E36 BMW M3 six-speed gearbox. The owner, Micke (Majkey on PassionFord), bought it in 2009. He reports 500 bhp and 505 Nm with a GTX3076 turbo and TG exhaust manifold, after an earlier 472 bhp with a Precision SC5862 (owner-reported figures).

Engine
Blue exhaust smoke prompted an engine rebuild by the owner and his friend Putte. The rebuild used CP pistons, Verdi rods, a CNC-ported head and a BD16+ inlet cam. A Vi-Pec V44 controls the engine with 990 cc injectors.

Power figures
The owner reported 472 bhp with a Precision SC5862, then 500 bhp and 505 Nm after switching to a GTX3076 and TG exhaust manifold. These are owner-reported. The separate dyno graph was identified by the owner as wheel horsepower, and he corrected the turbo designation printed on it.
Transmission
An E36 M3 six-speed gearbox was adapted to the Sierra, which also gained a Quaife differential and a hydraulic clutch.
Photographs from Maikey’s Garaget gallery, reproduced with permission. Original gallery
Sources