Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Ford

S1’s PassionFord diary follows a 2010 Mk2 Focus RS500 through two suspension setups. The first used H&R springs and spacers with the standard wheels. S1 still wanted better damping, so Mountune fitted and aligned its Clubsport suspension.

The RS500 outside on black wheels

The RS500 outside on black wheels. S1 on PassionFord, reused with permission. Source post.

Build specification

A set of OZ wheels changed the offset enough to dispense with the spacers. S1 also fitted a Milltek cat-back with ceramic-black tips, Powerflex lower-arm bushes and an Elevate lower torque mount. For the matt-black cage, S1 made an MDF jig to mark where the rear legs passed through the parcel-shelf supports.

Rear view through the glass showing the cage

Rear view through the glass showing the cage. S1 on PassionFord, reused with permission. Source post.

Build posts