Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Abarth, Fiat

On 500 Club Italia, mikepedo documented a 595 SS replica built from a Fiat 500 R. The owner wanted the black dashboard of a 500 L and chose Jaeger instruments and a 31 cm leather steering wheel. The R’s rear engine support was still fitted when the first photographs appeared.

Owner’s photograph of the 595 SS replica

The owner’s engine specification gives 596.94 cc after reboring for 73.70 mm Mahle pistons. The worked head has 36 mm inlet and 30 mm exhaust valves, and the engine breathes through a Solex 34 PBIC carburettor and a stainless replica exhaust. After the carburettor was rebuilt, mikepedo reported a steady idle on the first short road test.

Second view from the replica build thread

Photos from mikepedo on 500 Club Italia, reproduced with permission.

Owner’s posts