Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Ford
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
This is a 2009 2.5-litre Ford Focus RS Mk2 with a Roadrunner cartoon livery, designed by Tony Blackham and wrapped by Blueprint in Nottingham. The theme began with a Tasmanian Devil sticker on the rear bumper and developed over ten years through a series of liveries, shaped by Lisa Cowley's interest in rallying and Tony's love of cartoons. The listed specification includes a Collins CP420 calibration, Airtec Stage 3 intercooler, KMS Section 18 exhaust and white 20-inch Team Dynamics wheels.This 2009 2.5-litre Focus RS started its cartoon theme with a Tasmanian Devil sticker on the rear bumper. Over ten years, Lisa’s interest in rallying and Tony’s love of cartoons shaped a series of liveries. Tony designed the Roadrunner look, and Blueprint in Nottingham wrapped the car.Feature photographers @lc.visuals_ and @pi1grim_78, via Stance Auto Magazine. Original photograph, reproduced with permission.
Engine and powerThe owners list a Collins CP420 calibration, Airtec Stage 3 intercooler, uprated fuel pump and KMS Section 18 exhaust. These are owner-listed parts; no power figure is given.Wheels and suspensionThe white 20-inch Team Dynamics Pro Race 1.3 wheels sit on H&R springs, with a listed drop of 25 mm at the front and 35 mm at the rear.Exterior and liveryTony designed the Roadrunner look and Blueprint in Nottingham wrapped the car. Monkey Wrench made the bespoke headlights.SourcesStance Auto Magazine feature: build story and photo galleryOwner's Instagram @lisac1980Designer Tony Blackham's InstagramBuild specificationThe owners list a Collins CP420 calibration, Airtec Stage 3 intercooler, uprated fuel pump and KMS Section 18 exhaust. The white 20-inch Team Dynamics Pro Race 1.3 wheels sit on H&R springs, with a listed drop of 25 mm at the front and 35 mm at the rear. Monkey Wrench made the bespoke headlights.Build posts and photographsRead the owners’ build story and photo gallery in Stance Auto MagazineOwner’s Instagram @lisac1980Designer Tony Blackham’s Instagram
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Lisa Cowley and Tony Blackham’s Ford Focus Mk2 Roadrunner RS
This 2009 2.5-litre Focus RS started its cartoon theme with a Tasmanian Devil sticker on the rear bumper. Over ten years, Lisa’s interest in rallying and Tony’s love of cartoons shaped a series of liveries. Tony designed the Roadrunner look, and Blueprint in Nottingham wrapped the car.

Feature photographers @lc.visuals_ and @pi1grim_78, via Stance Auto Magazine. Original photograph, reproduced with permission.
Build specification
The owners list a Collins CP420 calibration, Airtec Stage 3 intercooler, uprated fuel pump and KMS Section 18 exhaust. The white 20-inch Team Dynamics Pro Race 1.3 wheels sit on H&R springs, with a listed drop of 25 mm at the front and 35 mm at the rear. Monkey Wrench made the bespoke headlights.
Build posts and photographs
Revision 2: Lisa Cowley and Tony Blackham’s Ford Focus Mk2 Roadrunner RS
This is a 2009 2.5-litre Ford Focus RS Mk2 with a Roadrunner cartoon livery, designed by Tony Blackham and wrapped by Blueprint in Nottingham. The theme began with a Tasmanian Devil sticker on the rear bumper and developed over ten years through a series of liveries, shaped by Lisa Cowley's interest in rallying and Tony's love of cartoons. The listed specification includes a Collins CP420 calibration, Airtec Stage 3 intercooler, KMS Section 18 exhaust and white 20-inch Team Dynamics wheels.

Feature photographers @lc.visuals_ and @pi1grim_78, via Stance Auto Magazine. Original photograph, reproduced with permission.
Engine and power
The owners list a Collins CP420 calibration, Airtec Stage 3 intercooler, uprated fuel pump and KMS Section 18 exhaust. These are owner-listed parts; no power figure is given.
Wheels and suspension
The white 20-inch Team Dynamics Pro Race 1.3 wheels sit on H&R springs, with a listed drop of 25 mm at the front and 35 mm at the rear.
Exterior and livery
Tony designed the Roadrunner look and Blueprint in Nottingham wrapped the car. Monkey Wrench made the bespoke headlights.
Sources