Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Ford

Mike and his wife chose a black five-door ST225 after a test drive sold them on the sound of its 2.5-litre five-cylinder. Mike taught himself to use a vinyl plotter to produce the graphics that gave Blackonblack its name.

Mike Greenwood’s 2009 Ford Focus ST225 “Blackonblack”

@focal_alpha, via Stance Auto Magazine. Original photograph, reproduced with permission.

Build specification

Mike reported 340 bhp with Revo Stage 2 software supplied by JKM Performance. His specification includes RS injectors, an RS clutch and flywheel, an Airtec plenum and a three-inch KMS Thunderstorm exhaust. He made aluminium end plates for the slam panel after an earlier pair melted, and 3D-printed a handle extension for the Mondeo bonnet-latch conversion.

Build posts and photographs