Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Abarth, Fiat
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
This white 2013 Fiat 500 Abarth was bought through Cars & Bids and first used as a daily car with track plans. After gasket and component failures the project changed direction and, over five years, became a show car with air suspension, chrome 17 × 8-inch SevenK Hydra wheels and a blue suede interior.BaggedAbarth bought the white 500 through Cars & Bids and initially used it as a daily with track plans. After gasket and component failures, the owner changed direction. Over five years the project evolved into a show car with chrome 17 × 8-inch SevenK Hydra wheels.Photo from BaggedAbarth’s MartiniWorks gallery, reproduced with permission.
Suspension and wheelsAir springs fitted to Megan Racing coilovers.Air Lift 3P management and an AccuAir tank.Chrome 17 × 8-inch SevenK Hydra wheels.InteriorCraftmasters trimmed the dashboard, door cards and seats in blue suede.EngineATM front-mounted intercooler and a Forge wastegate actuator.SourcesMartiniWorks build log: parts list and gallery (30 January 2026)The owner describes air springs fitted to Megan Racing coilovers, Air Lift 3P management and an AccuAir tank. Inside, Craftmasters trimmed the dashboard, door cards and seats in blue suede. The engine specification includes an ATM front-mounted intercooler and a Forge wastegate actuator.Owner posts and photosBaggedAbarth’s build log, parts list and gallery (30 January 2026)
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: BaggedAbarth’s 2013 Fiat 500 Abarth on air suspension
BaggedAbarth bought the white 500 through Cars & Bids and initially used it as a daily with track plans. After gasket and component failures, the owner changed direction. Over five years the project evolved into a show car with chrome 17 × 8-inch SevenK Hydra wheels.

Photo from BaggedAbarth’s MartiniWorks gallery, reproduced with permission.
The owner describes air springs fitted to Megan Racing coilovers, Air Lift 3P management and an AccuAir tank. Inside, Craftmasters trimmed the dashboard, door cards and seats in blue suede. The engine specification includes an ATM front-mounted intercooler and a Forge wastegate actuator.
Owner posts and photos
Revision 2: BaggedAbarth’s 2013 Fiat 500 Abarth on air suspension
This white 2013 Fiat 500 Abarth was bought through Cars & Bids and first used as a daily car with track plans. After gasket and component failures the project changed direction and, over five years, became a show car with air suspension, chrome 17 × 8-inch SevenK Hydra wheels and a blue suede interior.

Photo from BaggedAbarth’s MartiniWorks gallery, reproduced with permission.
Suspension and wheels
- Air springs fitted to Megan Racing coilovers.
- Air Lift 3P management and an AccuAir tank.
- Chrome 17 × 8-inch SevenK Hydra wheels.
Interior
Craftmasters trimmed the dashboard, door cards and seats in blue suede.
Engine
ATM front-mounted intercooler and a Forge wastegate actuator.
Sources