Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
BMW, Land Rover, Toyota

Individual 4×4 builds using BMW’s M57 diesel, with installation photographs and source accounts. See the M57 engine guide for donor identification.

LOF Clutches Defender 110 double-cab pickup

LOF Clutches fitted an M57 to its Defender 110 DCPU while retaining the Ford MT82 gearbox. The workshop describes a Syncro Gearboxes adaptor ring, BMW dual-mass flywheel and a clutch designed for the Ford input spline. Its account also covers cooling, intercooler plumbing and the dash interface. Read LOF’s build account.

M57 installed in LOF Clutches Defender 110 during assembly

The Defender engine bay during assembly. Photograph by LOF Clutches, reproduced with permission.

Andy Hoile’s 1990 Defender 90

Andy’s Defender uses an M57 from a 2004 BMW 330d and the donor’s six-speed manual gearbox, adapted to an LT230 transfer box. Before installation he refreshed the engine and its ancillaries. Read the Land Rover Monthly feature and build details.

BMW M57 engine in Andy Hoile’s Defender 90

Andy Hoile’s finished engine bay. Photograph from Land Rover Monthly / Land Rover Hub, reproduced with permission.

Max Ratzlaff’s Toyota Land Cruiser 105

Max replaced the original petrol engine with a BMW M57 and ZF six-speed automatic. The feature identifies McKinnon’s Cruisers mounts and crossmember, a Fusion Fabrication transfer-case adaptor and a custom pedal bracket. Read the 4X4 Australia build feature.

BMW M57 installed in Max Ratzlaff’s Toyota Land Cruiser 105

The M57 installation in Max’s 105 Series. Photograph from 4X4 Australia, reproduced with permission.

Browse more M57 modified builds.