Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Automotive EEPROMs
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

95-series serial EEPROMs generally communicate over SPI. In the named families, 95080 is 8 Kbit (1 KiB), 95320 is 32 Kbit (4 KiB) and 95640 is 64 Kbit (8 KiB). Consult the exact manufacturer's datasheet and suffix for supply, pinout, protection and page size: a similar eight-pin package does not imply the same interface or voltage.

For example, ST's M95320-A125/A145 datasheet describes automotive 32 Kbit SPI devices. ST's M95080-W/R/DF datasheet describes 8 Kbit SPI devices. The suffix and datasheet are needed before applying electrical specifications to a board.

Documented ECU examples

EVC's BDM100 list identifies ST95320 alongside AM29BL802 and MPC556 for its Bosch EDC16 VAG/BMW/Mercedes/PSA example; it also lists ST95640 for the Bosch EDC7 MAN/Iveco example and ST95080 for a Volvo/Ford ME9.0C example. These are tool-table examples, not assertions that all variants use the same part.

A service file catalogue separately records 95320 for a Bosch EDC16C36 Renault 0 281 013 907. The ECU identification, external flash, processor flash and EEPROM are different pieces of evidence; a complete repair record identifies each read and its method.

Some automotive variants include on-chip error correction. ST application note AN2440 describes ECC behaviour and identifies affected device families. Do not assume an older 95-series part and an ECC-equipped replacement have identical write behaviour.