Page organisation in this revision
- Page type
- Technical article
- Subject
- Automotive EEPROMs
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
93C-series serial EEPROMs use a Microwire-compatible interface. A 93C56 has 2 Kbit, or 256 bytes; a 93C86 has 16 Kbit, or 2,048 bytes. The same capacity can be addressed as eight-bit bytes or sixteen-bit words on some devices. Fixed and selectable variants exist: the Microchip 93LC56B is fixed ×16, while 93LC86C has hardware-selectable organisation. Other manufacturers' suffixes and voltage ranges must be checked in their own datasheets.
For the 4 Kbit device and reported VDO applications, see 93C66 EEPROMs in instrument clusters.Dashboard examples
ClusterMemorySource and limitationPorsche 986/996 older cluster style93C56 / 93C56BA cluster workshop guide identifies 93C56 in the older style; a community project reports 93C56B and a 256-byte image.Porsche 986/996 newer cluster style93C86 familyThe same guide identifies 93C86; a 2001 Boxster owner report identifies 93LC86. A diagnostic tool lists a C56/C86 change around 2001; inspect the actual cluster, particularly around the changeover.
Word organisation and how the programmer exports bytes can change the apparent order of the data. Identify the chip and tool settings and compare repeat reads; do not assume the same layout across cluster generations. In-circuit access can be affected by the rest of the board. Cluster data can include coding and vehicle-specific information, so preserve original data and use the correct module identification.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Microwire EEPROMs in instrument clusters
93C-series serial EEPROMs use a Microwire-compatible interface. A 93C56 has 2 Kbit, or 256 bytes; a 93C86 has 16 Kbit, or 2,048 bytes. The same capacity can be addressed as eight-bit bytes or sixteen-bit words on some devices. Fixed and selectable variants exist: the Microchip 93LC56B is fixed ×16, while 93LC86C has hardware-selectable organisation. Other manufacturers' suffixes and voltage ranges must be checked in their own datasheets.
Dashboard examples
Word organisation and how the programmer exports bytes can change the apparent order of the data. Identify the chip and tool settings and compare repeat reads; do not assume the same layout across cluster generations. In-circuit access can be affected by the rest of the board. Cluster data can include coding and vehicle-specific information, so preserve original data and use the correct module identification.
Revision 2: Microwire EEPROMs in instrument clusters
93C-series serial EEPROMs use a Microwire-compatible interface. A 93C56 has 2 Kbit, or 256 bytes; a 93C86 has 16 Kbit, or 2,048 bytes. The same capacity can be addressed as eight-bit bytes or sixteen-bit words on some devices. Fixed and selectable variants exist: the Microchip 93LC56B is fixed ×16, while 93LC86C has hardware-selectable organisation. Other manufacturers' suffixes and voltage ranges must be checked in their own datasheets.
For the 4 Kbit device and reported VDO applications, see 93C66 EEPROMs in instrument clusters.
Dashboard examples
Word organisation and how the programmer exports bytes can change the apparent order of the data. Identify the chip and tool settings and compare repeat reads; do not assume the same layout across cluster generations. In-circuit access can be affected by the rest of the board. Cluster data can include coding and vehicle-specific information, so preserve original data and use the correct module identification.