Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Automotive EEPROMs
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

93C-series serial EEPROMs use a Microwire-compatible interface. A 93C56 has 2 Kbit, or 256 bytes; a 93C86 has 16 Kbit, or 2,048 bytes. The same capacity can be addressed as eight-bit bytes or sixteen-bit words on some devices. Fixed and selectable variants exist: the Microchip 93LC56B is fixed ×16, while 93LC86C has hardware-selectable organisation. Other manufacturers' suffixes and voltage ranges must be checked in their own datasheets.

Dashboard examples

ClusterMemorySource and limitation
Porsche 986/996 older cluster style93C56 / 93C56BA cluster workshop guide identifies 93C56 in the older style; a community project reports 93C56B and a 256-byte image.
Porsche 986/996 newer cluster style93C86 familyThe same guide identifies 93C86; a 2001 Boxster owner report identifies 93LC86. A diagnostic tool lists a C56/C86 change around 2001; inspect the actual cluster, particularly around the changeover.

Word organisation and how the programmer exports bytes can change the apparent order of the data. Identify the chip and tool settings and compare repeat reads; do not assume the same layout across cluster generations. In-circuit access can be affected by the rest of the board. Cluster data can include coding and vehicle-specific information, so preserve original data and use the correct module identification.