Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Flash chips
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
AMD, Audi, Bosch, Mercedes-Benz

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

Some Bosch engine controllers use two byte-wide flash chips, commonly labelled high and low in service files. A service-file listing identifies separate HHH and LLL AM29F020 files and a 24C04 EEPROM for an Audi A6 2.5 TDI Bosch EDC15M, 0 281 010 399 / 4B0 907 401 AC. It is an identification for that listed unit, not every EDC15M.

An ECU memory catalogue lists 29F020 against Bosch 0 281 001 463 and 0 281 001 464, and 28F020 against other Bosch references including 0 281 001 455. The catalogue does not establish the full chip manufacturer or suffix for those rows. A Mercedes W202 C250 service reference lists 0 281 001 463 and describes 27C020 or 29F020 pairs for that application group; inspect the actual ECU because the reference also lists different memory options.

Identify the device and files

These 2 Mbit byte-wide parts have 256 KiB nominal capacity per chip; two chips together hold 512 KiB. Keep the high and low reads identified by position. A merged 16-bit image is a tool-specific representation: do not assume concatenation or byte order without checking the method that produced it.

Do not treat 28F020, 29F020 and 27C020 as the same programming device. The AMD flash data book lists Am28F020 and Am28F020A as 256K × 8 devices with 12 V program/erase, but different algorithm features. Those specifications are for the named AMD parts, not an identification of the unsuffixed 28F020 in the service catalogue. Verify full markings, voltage, erase behaviour, package, wiring and programmer support for the particular part.

Some online indexes label an AMD Am29F002B datasheet “29F020”; the document itself identifies Am29F002B/NB. Do not use that index label as proof that the actual ECU chip is an Am29F002B or that the two markings have identical programming behaviour. See EPROM-pinout flash for related byte-wide parts.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: 28F020 and 29F020 paired ECU flash

Some Bosch engine controllers use two byte-wide flash chips, commonly labelled high and low in service files. A service-file listing identifies separate HHH and LLL AM29F020 files and a 24C04 EEPROM for an Audi A6 2.5 TDI Bosch EDC15M, 0 281 010 399 / 4B0 907 401 AC. It is an identification for that listed unit, not every EDC15M.

An ECU memory catalogue lists 29F020 against Bosch 0 281 001 463 and 0 281 001 464, and 28F020 against other Bosch references including 0 281 001 455. The catalogue does not establish the full chip manufacturer or suffix for those rows. A Mercedes W202 C250 service reference lists 0 281 001 463 and describes 27C020 or 29F020 pairs for that application group; inspect the actual ECU because the reference also lists different memory options.

Identify the device and files

These 2 Mbit byte-wide parts have 256 KiB nominal capacity per chip; two chips together hold 512 KiB. Keep the high and low reads identified by position. A merged 16-bit image is a tool-specific representation: do not assume concatenation or byte order without checking the method that produced it.

Do not treat 28F020, 29F020 and 27C020 as the same programming device. The AMD flash data book lists Am28F020 and Am28F020A as 256K × 8 devices with 12 V program/erase, but different algorithm features. Those specifications are for the named AMD parts, not an identification of the unsuffixed 28F020 in the service catalogue. Verify full markings, voltage, erase behaviour, package, wiring and programmer support for the particular part.

Some online indexes label an AMD Am29F002B datasheet “29F020”; the document itself identifies Am29F002B/NB. Do not use that index label as proof that the actual ECU chip is an Am29F002B or that the two markings have identical programming behaviour. See EPROM-pinout flash for related byte-wide parts.

Revision 1: 28F020 and 29F020 paired ECU flash

Some Bosch engine controllers use two byte-wide flash chips, commonly labelled high and low in service files. A service-file listing identifies separate HHH and LLL AM29F020 files and a 24C04 EEPROM for an Audi A6 2.5 TDI Bosch EDC15M, 0 281 010 399 / 4B0 907 401 AC. It is an identification for that listed unit, not every EDC15M.

An ECU memory catalogue lists 29F020 against Bosch 0 281 001 463 and 0 281 001 464, and 28F020 against other Bosch references including 0 281 001 455. The catalogue does not establish the full chip manufacturer or suffix for those rows. A Mercedes W202 C250 service reference lists 0 281 001 463 and describes 27C020 or 29F020 pairs for that application group; inspect the actual ECU because the reference also lists different memory options.

Identify the device and files

These 2 Mbit byte-wide parts have 256 KiB nominal capacity per chip; two chips together hold 512 KiB. Keep the high and low reads identified by position. A merged 16-bit image is a tool-specific representation: do not assume concatenation or byte order without checking the method that produced it.

Do not treat 28F020, 29F020 and 27C020 as the same programming device. The AMD flash data book lists Am28F020 and Am28F020A as 256K × 8 devices with 12 V program/erase, but different algorithm features. Those specifications are for the named AMD parts, not an identification of the unsuffixed 28F020 in the service catalogue. Verify full markings, voltage, erase behaviour, package, wiring and programmer support for the particular part.

Some online indexes label an AMD Am29F002B datasheet “29F020”; the document itself identifies Am29F002B/NB. Do not use that index label as proof that the actual ECU chip is an Am29F002B or that the two markings have identical programming behaviour. See EPROM-pinout flash for related byte-wide parts.