Titanium is used in some performance exhaust components to reduce weight. Actual savings depend on the complete system, its wall thickness and its design; compare the weights of equivalent assemblies rather than assuming a fixed saving.
Selection and installation
Confirm the alloy, wall thickness, supported vehicle and temperature suitability with the manufacturer. A lightweight thin-wall system can be sensitive to poor mounting, vibration or impact. Check clearances, movement and mounting instructions, particularly around hot and moving components. Material alone does not guarantee more power or a particular sound.
Fabrication
Titanium welding requires cleanliness and inert-gas protection of the hot weld and adjacent areas, including the inside of a tube. Contamination can embrittle the weld. Use a fabricator experienced with titanium and follow the specified welding procedure. Heat colour alone is not a complete weld-quality test.
References: Nippon Steel: automotive titanium applications; TWI: weldability of titanium.
See also Exhaust systems and Custom exhaust systems.