Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Exhausts
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

A custom or bespoke exhaust is fabricated or adapted for a particular vehicle and brief. It can solve a packaging problem, replace unavailable parts or meet a specified sound, appearance or performance goal. It may use mild steel, stainless steel or titanium; agree the material and grade for each major component.

Agree the specification

  • Identify the vehicle, engine, modifications and intended road or competition use.
  • Record which existing components, sensors and emissions controls remain, and the start and end points of the work.
  • Agree tubing grade, dimensions, silencer and resonator arrangement, tailpipe position, joints, finish and mounting strategy.
  • Discuss sound and cabin drone, ground clearance, heat shielding, service access, cost, warranty and how the finished system will be assessed.

Fabrication and checks

Allow for engine and exhaust movement and thermal expansion. Check clearance from the body, suspension, brake and fuel lines, wiring and heat-sensitive parts throughout their travel. Mount the system without forcing joints into position. Check welds and joints for leaks, and recheck fasteners and clearances after heat cycles in accordance with the fabricator's instructions. Titanium requires particular weld cleanliness and inert shielding; see TWI's titanium welding guidance.

Road use

A bespoke build is not automatically road legal. For UK cars, the MOT checks exhaust security, noise and emissions equipment under vehicle-specific rules. Discuss compliance before work starts and retain relevant documentation. See DVSA exhaust inspection and DVSA noise and emissions.

See also Aftermarket exhaust systems and Exhaust systems.