
Multi-PROG III is the name used for the third Xhorse programmer after VVDI PROG and Multi-PROG. The photograph published on 10 November 2026 shows a unit labelled MULTI-PROG III, with a 48-pin ZIF socket marked as a universal pin driver.
That account is a dealer preview, not an Xhorse datasheet. On that date the seller said a China version was expected shortly and that an international GL version was not yet available. The post gives no processor, memory, supply voltage or dimensions.
The same comparison claims faster reading and writing of large memory, stronger data verification, wider ECU coverage including electric-vehicle control units, and OBD reading and writing at least as far as Multi-PROG. It also names a UFS/eMMC adapter for memory removed from a board. Treat those points as the seller’s claims until Xhorse publishes a specification. The seller also advertises immobiliser and key-data work. Those operations can be unlawful, and this page does not describe them.
Source: xhorsevvdi.com, 10 November 2026.