Tuning Wiki
Browse XGecu

EPROM and flash programmers

XGecu is the programmer brand of Haikou Xingong Electronics. The English site currently leads with the T76, described as a USB 3.0 universal programmer measuring 12 × 7 × 2.8 cm. A product photograph on that site could not be retrieved.

The same page compares the earlier TL866II Plus with the T48 and T56, both marked in production. The T48 is described as the replacement for the TL866II Plus. Quoted figures are the manufacturer’s own:

  • TL866II Plus: 16-bit controller at 32 MHz, 40 pin drivers, USB 1.1, NAND to 8 Gbit at 3.3 V only, no SPI NAND and no eMMC, 25-series NOR to 512 Mbit, VPP to 18 V, VCC 1.8 V to 6.5 V, and a list of more than 17,000 devices.
  • T48: 32-bit controller at 120 MHz, 40 plus 16 pin drivers, USB 2.0 high speed, NAND to 256 Gbit including 1.8 V, SPI NAND, eMMC, 25-series NOR to 2 Gbit, VPP to 25 V, VCC 1.8 V to 6.5 V, and more than 31,000 devices.
  • T56: 32-bit controller at 200 MHz plus an FPGA, 48 plus 8 pin drivers, USB 2.0 high speed, the same NAND ceiling, SPI NAND, faster eMMC, VCC from 1.2 V to 6.5 V, and more than 33,000 devices. The stated size is 12.9 × 8.5 × 2.9 cm.

Haikou Xingong says the older TL866A and TL866CS left production in February 2018, and that later units offered on marketplaces are counterfeit. A listed device count is not coverage of a particular ECU.

Source: XGecu English site.