Tuning Wiki
Browse Xeltek
Xeltek SuperPro 6100 universal programmer with a socket adapter fitted
Xeltek SuperPro 6100 with a socket adapter. Image credit: Xeltek. Image source.

EPROM and flash programmers

SuperPro 6100N is Xeltek’s current 144-pin-driver universal programmer. The photograph is Xeltek’s SuperPro 6100 with a socket adapter fitted. Xeltek says the 6100N uses USB 2.0, can also run from a CompactFlash card without a PC, and can be clustered in groups of up to 15. The stated supply is 12 V at 1.5 A from a 100 V to 240 V adapter. The main unit is 148 × 216 × 94 mm and weighs 1.6 kg. VCC is listed from 1.2 V to 5 V, with in-circuit programming through an optional adapter.

Named device groups include EPROM, serial and parallel EEPROM, NOR flash, FPGA configuration PROM, NVRAM, SPLD, CPLD, EPLD, firmware hubs and microcontrollers. Package adapters cover DIP through QFP, TSOP, QFN and BGA types. The manual for the 6100, 611S and 610P says insertion testing applies to devices of 48 pins or fewer and is model-dependent. Confirm the part in Xeltek’s current device list.

Sources: Xeltek SuperPro 6100N; SuperPro 6100 series manual.