Volvo P1, P3, and early CMA platforms (such as the 2015 V60 and 2017 V40) run a 500 kbit/s High-Speed CAN powertrain/chassis bus alongside a 125 kbit/s Low-Speed / Medium-Speed CAN body bus bridged by the Central Electronic Module (CEM). Powertrain and chassis frames encode multi-byte values in Motorola (big-endian) byte order.
Volvo V60 (2015) & V40 (2017) Powertrain & Chassis CAN IDs
Compiled from opendbc volvo_v60_2015_pt.dbc and volvo_v40_2017_pt.dbc. Note that IDs shifted between the P3 V60 and V40 platforms, so both are shown side by side.
| Hex ID (V60) | Hex ID (V40) | Name | Module | Signals, DBC Bits & Scaling |
|---|---|---|---|---|
0x010 (16) | 0x008 (8) | SAS0 | SAS | SteeringAngle (53|14@BE+, ×0.0445° on V60 / ×0.04395° on V40), steering direction & rate |
0x020 (32) | 0x055 (85) | AccPedal | ECM | AccPedal (V60: 17|10@BE+, ×0.1 %; V40: 9|10@BE+, ×0.1 %, plus brake pedal active bits) |
0x051 (81) | 0x030 (48) | FSM0 | FSM | Forward Sensing Module ACC status (tracking, on/off, active, FCW) |
0x127 (295) | 0x010 (16) | CCButtons | CEM | Cruise / ACC OnOff, Set, Resume, Minus, TimeGap+/− buttons |
0x12A (298) | 0x065 (101) | EngineData | ECM | Engine RPM (52|13@BE+, ×1 rpm), BrakePressed (bit 38 on V60) |
| — | 0x040 (64) | TCM0 | TCM | V40: GearShifter (46|2@BE+: 0=P, 1=R, 2=N, 3=D) |
| — | 0x0C0 (192) | Gear | TCM | V40: TransmissionGear (36|3@BE+, +1) |
0x148 (328) | 0x110 / 0x130 | VehicleSpeed | BCM | Vehicle speed (55|16@BE+, ×0.01 km/h on V60 0x148 and V40 0x110/0x130) |
0x220 (544) | 0x120 (288) | wheelspeed1 | BCM | Rear wheel speeds LR & RR (V60: 55|16 & 39|16, ×0.01 − 327.68) |
0x235 (565) | 0x0F5 (245) | wheelspeed0 | BCM | Front wheel speeds LF & RF (V60: 55|16 & 39|16, ×0.01 − 327.68) |
0x246 (582) | 0x125 (293) | PSCM1 | PSCM | SteeringAngleServo (V60: 23|16@BE+, ×0.0447 − 1464.8°; V40: 47|16@BE+, ×0.04395 − 1440.15°), LKATorque (−2000), LKAActive |
0x262 (610) | 0x0D0 (208) | FSM1 / FSM2 | FSM | LKAAngleReq (×0.04 − 327.68° on V60 / ×0.04395 − 360.04° on V40), torque limit, direction |
0x20A (522) | 0x1B0 (432) | Brake_Info | BCM | BrakePressure (17|10@BE+), brake pedal status |
0x2EE (750) | — | HandBrake | BCM | Handbrake button & state |
0x3EE (1006) | — | Doors | CEM | Driver & passenger door closed bits (bits 8, 9) |
0x40F (1039) | 0x2A9 (681) | MiscCarInfo | CEM | Turn signals (0=None, 1=Left, 3=Right), high beam |
Volvo UDS Diagnostic Request / Response CAN IDs
| Request Hex ID | Response Hex ID | Decimal Pair | Module |
|---|---|---|---|
0x726 | 0x72E | 1830 / 1838 | CEM (Central Electronic Module) |
0x730 | 0x738 | 1840 / 1848 | PSCM (Power Steering Control Module) |
0x764 | 0x76C | 1892 / 1900 | FSM (Forward Sensing Module) |
0x793 | 0x79B | 1939 / 1947 | CVM (Closing Velocity Module) |
0x7DF | — | 2015 | Global Functional Request |
Sources
- commaai/opendbc — volvo_v40_2017_pt.dbc. Accessed 2026-11-17.
- commaai/opendbc — volvo_v60_2015_pt.dbc. Accessed 2026-11-17.