Volkswagen Group vehicle networks use a gateway to link internal CAN networks with the tester. Older modules can use KWP 2000 over Volkswagen TP 2.0. MQB diagnostic modules can use UDS over ISO-TP. Check the platform and controller before choosing a decoder.
CAN identifiers
| 11-bit CAN ID | Traffic | Scope |
|---|---|---|
0x280 | Motor_1 broadcast | Legacy PQ powertrain example in the wiki CAN ID tables. |
0x0A8 | Motor_12 broadcast | MQB definition in the community DBC. |
0x7A8 / 0x300 | Tester / ECU | Negotiated pair in the cited legacy TP 2.0 capture. |
0x712 / 0x77C | Tester / ECU | MQB steering-module diagnostic pair used by the cited comma.ai implementation. |
Read-only identification examples
| Application | Diagnostic payload | Positive response prefix |
|---|---|---|
| Legacy KWP identification over TP 2.0 | 1A 9B | 5A 9B |
| MQB steering-module manufacturer spare part number | 22 F1 87 | 62 F1 87 |
| MQB steering-module software version | 22 F1 89 | 62 F1 89 |
The TP 2.0 capture shows 12 00 02 1A 9B on 0x7A8 after opening the channel. Here 12 includes the transport opcode and sequence number, and 00 02 is the diagnostic payload length. The data-phase IDs and sequence number belong to that capture. The MQB implementation reads its identifiers in an extended diagnostic session, and the ISO-TP Single Frame for the part-number read begins 03 22 F1 87 before padding.
Related references
- Volkswagen PQ CAN ID tables
- Volkswagen MQB and MLB CAN ID tables
- Volkswagen TP 2.0 framing
- Vehicle diagnostics protocols
- ISO-TP on CAN