KWP1281 (Keyword Protocol 1281) is a legacy diagnostic communication protocol used by some Volkswagen of America and Audi of America ECUs. SAE J2818 defines the protocol for implementation through a SAE J2534 interface. KWP1281 is carried over the diagnostic K-line and is distinct from KWP2000 (ISO 14230) and from CAN-based protocols. Availability and initialization details depend on ECU and vehicle.
Read-only example
The open-source kw1281test project documents this read-only diagnostic command for a Central Convenience Controller at address 46:
kw1281test COMx 9600 46 ReadFaultCodesThis is a tool-level command, not a raw K-line byte trace. The same project lists address 46 among common module addresses, but the target ECU may use a different address or baud rate. Its documented read-fault command is distinct from ClearFaultCodes; the latter changes stored state and is intentionally omitted.
SAE J2818 establishes KWP1281’s scope but does not make every legacy module behave identically. Confirm support and correct vehicle-specific addressing before requesting data. KWP1281 is not the bus used by Volkswagen convenience CAN; see Volkswagen convenience CAN.
Sources
- SAE J2818_201905, Keyword Protocol 1281. Defines KWP1281 and notes ECUs in some VW of America/Audi of America vehicles.
- kw1281test use-case documentation. ReadFaultCodes example and common module addresses (including Central Convenience 46).