Tuning Wiki

Ultima Sports (Ultima Sports Ltd, Hinckley, Leicestershire) was a British maker of mid-engined supercar kits and component cars, most of them powered by Chevrolet V8s. Its models were the Ultima Sport and Spyder, the GTR and Can-Am, the Evolution and the RS. The firm has been sold and is winding down. On 6 August 2026 Peregryn Motors, Inc. of Franklin, Tennessee, completed its purchase of the Ultima brand, designs, tooling and manufacturing rights. The UK company stopped taking new orders, is completing kit orders placed before August 2026, and plans to close in early 2027. On 18 August 2026 it was renamed UCOE Limited (Companies House 02771950). Peregryn will not sell self-assembly kits. It plans to sell fully built cars and rolling chassis, assembled in Tennessee from 2027, under the model names GT-R and GT-S.

History

Lee Noble built the first Ultima, the Mk1, in 1983 under Noble Motorsport. It had a Renault 30 V6 and gearbox in a tubular spaceframe. The Mk2 followed in 1984. Ted Marlow was its first customer, and he later fitted his car with a Chevrolet small-block V8 and a Porsche transaxle. Noble and Marlow won club races and championships in Mk2 cars. The Mk3 of about 1989 kept the PRV V6. In 1991 McLaren bought two Mk3 kits as test mules for the McLaren F1. Later, McLaren also used an Ultima GTR as a mule for the MP4-12C.

In 1992 Ted Marlow and Richard Marlow bought the rights, jigs and moulds from Noble. Ultima Sports Limited was incorporated on 8 December 1992. Production began at Long Itchington, Warwickshire, and moved to purpose-built premises in Hinckley by 1997. By then about 150 cars had been sold. Richard Marlow, a director since 2000, announced the company's sale in 2026.

Models

An Ultima Evolution coupé at a race track.
Ultima Evolution coupé (US-registered as a 2014 car) at Belmont Race Track, 2019. Photo: Mr.choppers, Wikimedia Commons, CC BY-SA 3.0; resized.
ModelYearsEngines (typical)Gearbox
Mk1, Mk2, Mk3 (Noble Motorsport)1983–about 1991Renault 30 / PRV V6; Chevrolet V8 in Marlow's Mk2Renault; Porsche transaxle (Marlow car)
Ultima Sport / Spyder1992–1999Chevrolet small-block V8Porsche transaxle
GTR (coupé) and Can-Am (roadster)1999–2015Factory standard: Chevrolet small block from American Speed (GTR640, GTR720), LS1, LS3 (480 bhp), LS7. Many other engines fitted by owners.Porsche G50 five-speed or G52 six-speed transaxle
Evolution coupé and convertible2015–2026GM LS-family V8s, e.g. LS3 480 bhp; up to 1,020 hp American Speed engine (manufacturer claim)Not established
RS2019–2026GM LT1 (480 hp), LT4 supercharged (650 hp), LT5 supercharged (800 hp, with an optional 1,200 hp pack)Porsche-sourced six-speed manual

All cars had a tubular steel spaceframe and GRP or composite bodywork. In the UK they were sold as kits for owner assembly or as factory-built turnkey cars. In the US, kits and engine-less rolling chassis were sold. A GTR720 recorded 0–100–0 mph in 9.4 s in 2006, a figure Ultima promoted as a road-car record.

Engine management

Ultima did not publish an ECU specification for its LS- and LT-engined cars. A GM V8 of each generation needs a controller that matches its crank reluctor:

  • Gen IV LS3 and LS7: a 58x reluctor, run by GM's E38/E67-family controllers.
  • Gen V LT engines: E92-family controllers.

Which GM or aftermarket controller was standard on factory Ultimas is not established. Early GTR owners discussed Delphi MEFI-4B-based aftermarket kits for the LS7 in forums (owner reports only). Peregryn lists optional race electronics and data logging for the GT-R, without naming hardware.

Not established

  • The ECU and loom supplied with Ultima factory-built LS3, LT1, LT4 and LT5 cars.
  • Total Ultima production.
  • Whether Peregryn will reuse Ultima's existing powertrain and ECU packages.

Sources

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.