ThunderMax 309-589 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.

Application and identification
2018–2020 Harley-Davidson Softail models with the Milwaukee-Eight engine, subject to the exact model and electronics. Manufacturer source.
ThunderMax’s legacy product page lists 2018, while the support document index also identifies 2018–2020 Softail for 309-589. Confirm trim and compatibility with the current manufacturer guide.
Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.
Control and installation
ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.
Connector information
This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.