TheStig's Alfa Romeo MiTo is a 135 CV 1.4 MultiAir Distinctive, bought new in October 2009 by its owner Alessio, and converted with a Garrett 1446 turbo. Seven years later it gained 305 mm Brembo brakes, a reinforced clutch and a direct intake. The owner reports a dyno result of about 200 CV and just over 300 Nm (owner-reported, single source).
Turbo and chassis
The first build list paired a Garrett 1446 turbo with a larger Orra Racing intercooler, a Brain 200-cell catalyst in the downpipe, a Ragazzon rear exhaust section and Serial Tuning engine calibration. The chassis ran Eibach springs, 12 mm spacers front and rear, and drilled Zimmermann front discs.
Seven-year update
Brakes were upgraded to 305 mm discs with four-piston Brembo calipers, braided lines and Roesch XC4 pads. A reinforced Fiorentini clutch was fitted and the panel filter was replaced with an MTD direct intake. The owner-reported dyno result was about 200 CV and just over 300 Nm.


Photographs by TheStig, reproduced with permission from the ClubAlfa.it posts linked below.