Saab Trionic 5 uses two byte-wide external flash devices on its MC68332-based ECU. T5Suite's hardware reference describes 28F512 devices in Trionic 5.2 and 28F010 devices in Trionic 5.5.
| ECU | Flash pair | Nominal total |
|---|---|---|
| Trionic 5.2 | Two 28F512, 512 Kbit (64 KiB) each | 128 KiB |
| Trionic 5.5 | Two 28F010, 1 Mbit (128 KiB) each | 256 KiB |
The reference describes even and odd program bytes stored on separate chips. A combined ECU read therefore cannot be assumed to equal either individual chip file or two chip reads simply concatenated. Identify the chip position and file format before comparing or rebuilding an image.
Originals and replacement devices
The BDM-Suite documentation identifies Intel 28F512 in T5.2, and Intel, AMD and CSI 28F010 in T5.5. It lists additional supported replacements: AT29C512 for T5.2 and AM29F010, SST39SF010A, AMIC 29010L, M29F010B and AT29C010 for T5.5. These are supported replacement examples, not claims of factory fitment or universal drop-in compatibility. The T5 CAN Flasher documentation likewise distinguishes original and replacement families.
For the documented aftermarket M29F010B option, ST’s datasheet specifies 1 Mbit organised 128K × 8, a single 5 V supply for read/program/erase, and eight uniform 16 KiB erase blocks. The replacement listing describes tool support; check the actual ECU, complete ordering code and programming method.
The Intel 28F010 datasheet identifies a 128K × 8 device with a separate 12 V VPP specification. Do not generalise this to every manufacturer, suffix or replacement. Identify the installed device and use a compatible programming algorithm and voltage. BDM-Suite explicitly notes different algorithms for newer replacements.
Other reported 28F512 applications include Bosch MP5.2 examples in a service-file catalogue and a 1998 Kia Sephia Siemens ECU listing. These listings identify particular units; verify the device marking on the board.
Related: EPROM-pinout flash and Intel 28F flash in engine controllers.