This is a partial wiring reference for RHT Motorsport’s MK60/MK60E1/MK60E5 digital wheel-speed module documented in its 28 August 2021 installation note. Positions below are the ABS controller main connector positions used by this module; they are not pin numbers on the accessory itself or a complete ABS ECU pinout. Identify the actual ABS connector and verify the module version before installation.
| ABS position | Wheel speed in RHT guide | Typical colour in guide |
|---|---|---|
| 14 | Front left | White |
| 12 | Front right | Blue |
| 10 | Rear left | Green |
| 8 | Rear right | Yellow |
RHT’s guide distinguishes the module wires inserted into the ABS connector from the output wires to the destination device. It describes the green reference supply as 5 V or 12 V according to the specific module; confirm the supplied module and ECU input before connecting. Its colours are typical markings, not universal vehicle harness colours. Source: RHT MK60/MK60E1 wheel-speed module installation notes, linked from RHT’s FAQ.