RACELOGIC VBOX LapTimer R (RLVBLAP-R) is a GPS/GNSS lap-timing display and data logger, with rear-mounted connectors.

Specifications and operation
RACELOGIC specifies 25 Hz logging to SD card, predictive lap timing, position-based comparison and LED speed-difference indications. Input supply is 7–30 V DC; listed dimensions are 120 × 50 × 15 mm, weight 156 g (unit only). Hardware versions and kit contents vary. Overview; technical specifications.
Pinouts and wiring
The manufacturer pinout lists a two-pin LEMO POWER connector: pin 1 positive, pin 2 ground. The separate five-pin RS232/CAN connector is:
| Pin | Function |
|---|---|
| 1 | RS232 transmit |
| 2 | RS232 receive |
| 3 | CAN high |
| 4 | CAN low |
| 5 | Power input |
The SMA antenna connector carries GNSS signal; its chassis is ground. Consult RACELOGIC for the proper lead, connector orientation and exact hardware revision. Do not use a connector-face sketch as the wire-entry view. Match vehicle CAN decoding, supply and termination to the installation.
See the RACELOGIC manufacturer page for the family comparison.
Data analysis software

Copy the recorded session from the memory card and open it in Circuit Tools to compare lap times, track position and speed traces. Video is available only when a compatible video recording is separately present. The manufacturer lists Circuit Tools for analysis of this product. Manufacturer product documentation.
Download Circuit Tools from RACELOGIC. The manufacturer offers Windows, macOS and iOS editions; check the product, file and operating-system compatibility for the edition used. See the RACELOGIC manufacturer guide for analysis workflow and edition differences.