Establish the application
Record the vehicle make, model, year, engine code and transmission alongside the ECU label and diagnostic identification. Source lists include both GM and Fiat applications and sometimes list different ECU designations for similar vehicle descriptions. Treat a listing as a lead, then identify the actual unit.
Record the ECU and file
- Record the full Bosch and vehicle-manufacturer part numbers, exact ME7.6 variant, hardware revision, software and calibration identifiers.
- Where independently verified, record the processor and memory type, connector and method used to obtain each observation. Distinguish a label claim from a measured or read value.
- Keep the original read, its hash, the tool and version, and the method and memory areas it includes. An engine calibration read is not necessarily a complete backup.
- Match any definition, diagnostic channel, checksum support and read / write / recovery method to the exact hardware and software. Record each source, axis, unit and scaling before interpreting a map.
Tool and reference boundaries
I/O Terminal and Dimsport list different K-line and CAN operations for different ME7.6 contexts. Their published coverage describes their own tools; it is not evidence that every tool, hardware revision or software supports the same operation. ME7.1 / ME7.5 Audi / VW examples elsewhere on the wiki do not establish ME7.6 map addresses or tool compatibility.
Establish a healthy baseline, preserve a recoverable original and verify the tool documentation and recovery path for the unit before making changes. Keep each result tied to the examined software.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
- Dimsport New Genius ECU application list. Dimsport / Holdim Group; independent PDF mirror. Lists Fiat Group and General Motors protocols; coverage is specific to the tool and its release. Source revision 2013 application list, release D2-13, page 2; accessed 2026-11-10.
- I/O Terminal Bosch ECU tool coverage. I/O Terminal; tool-specific Opel and Fiat ECU and memory coverage. Source revision online coverage list as accessed; accessed 2026-11-10.
- DFB Technology DFOX ECU driver list. DFB Technology; Opel ECU and tool-driver list; hardware entries are examples, not universal specifications. Source revision January 2025 driver list, Opel entries; accessed 2026-11-10.