Magtrol makes motor-testing dynamometers, torque sensors, brakes and controllers. Its dynamometers include component and motor-test equipment; a WB-series test-bench absorber should not automatically be treated as a complete automotive rolling road.

History
Magtrol's historical timeline credits John E. Duncan with founding Magtrol Inc. in 1953, developing hysteresis brakes and a dial-weight dynamometer. It records the 4609 speed-stabilised dynamometer controller in 1966 and the 4629 programmable controller in 1984. Magtrol SA was formed in Switzerland in 2000 from Vibro-Meter's instrumentation division and a merger with its US parent company. Magtrol Inc. history; Magtrol SA anniversary.
Dyno types and models
- HD and ED: hysteresis and engine dynamometer families listed in Magtrol's motor-test manuals. Check individual ratings and cooling requirements. Magtrol manuals.
- WB: eddy-current dynamometers for test benches. The WB 23 and WB 27 are examples intended for high-speed motors and dental or surgical tool testing. WB series; WB 23 / WB 27.
- PB: powder-brake dynamometers; their operating principle and rated speed envelope differ from the eddy-current WB family. WB / PB documentation.
Controllers and software
Magtrol lists the DSP7000 and DSP7010 controllers with its hysteresis, eddy-current and powder-brake products, and M-TEST 7 motor-testing software. A compatible torque/speed conditioner and DES excitation supply can be required with WB or PB units. The DSP7000 documentation identifies single-channel DSP7001 and dual-channel DSP7002 configurations; installed options and connections determine capability. WB system options; DSP7000 datasheet.
Use the manufacturer’s torque, speed and continuous-power curves for the specific absorber, and confirm the controller, excitation supply and sensor interfaces before combining components. See Eddy-current dynamometers.
Explore the Dynamometers section and the manufacturers and suppliers directory. Model names, control hardware and support can change; identify the exact machine and its configuration before ordering parts or comparing specifications.