Tuning Wiki

ISO/TS 21815-2 specifies an on-board J1939 communication interface between a connected collision-avoidance or collision-warning device and mobile machines used in earthmoving, mining and road construction. The connected device may provide intervention signals intended to slow, stop or prevent machine motion; it may also provide information to a warning system.

Collision warning or avoidance device communicates with machine control through a J1939 interface
Conceptual interface only. Follow the specific machine and safety-system documentation.

The ISO specification explicitly says the interface is not plug-and-play: machine and collision-system manufacturers may need to agree on additional details. This is a safety-related control interface, not a general diagnostic example. Do not infer intervention messages or machine behavior from J1939 alone.

Source

  • ISO/TS 21815-2:2021, Earth-moving machinery—Collision warning and avoidance—Part 2: On-board J1939 communication interface. The ISO page states the edition was reviewed and confirmed in 2024.