Tuning Wiki

Intel's Smart 5 boot-block family includes the 28F200B5, 28F400B5 and 28F800B5. The Intel family datasheet describes 2, 4 and 8 Mbit devices with selectable 8- or 16-bit organisation and top- or bottom-boot options. Full capacities are 256 KiB, 512 KiB and 1 MiB respectively.

ECU examples

A P01/P59 service reference identifies the Intel AB28F400B5, 512 KiB, for a GM P01 with hardware number 09386530 and service number 12200411, the “0411” application. The same reference lists an AMD AM29F800BB in a P59 example. A PCM Hacking user report identifies AM29F800BB in another P59, service number 12586243. These are documented examples; inspect the actual device and ECU identifiers instead of applying a single memory claim to every P01 or P59.

Supply and programming

The Intel Smart 5 datasheet specifies 5 V VCC and a separate VPP input which accepts either 5 V or 12 V, within the tolerances and operating conditions in that datasheet. Its 28F400B5 is not the same specification as the older 28F400BX described in Intel 28F flash in engine controllers, whose cited BX datasheet specifies 12 V VPP for erase/write. Both the exact suffix and the ECU circuit matter; this device specification is not an instruction to apply either voltage directly to an ECU.

The family uses a boot block, parameter blocks and larger main blocks. Top and bottom boot versions place those blocks differently. Check the complete marking, block layout, speed and temperature grade, programmer algorithm and board design before selecting a replacement. A matching 512 KiB file or similar 44-pin package does not establish interchangeability.

Sources