Tuning Wiki

Hatton Systems designs, manufactures and installs bespoke chassis dynamometers and vehicle-test equipment, and offers calibration, repairs and upgrades to other manufacturers' systems. Hatton Systems.

Car on a Hatton Systems chassis dynamometer with restraint equipment.
Vehicle testing pictured on Hatton Systems' chassis dynamometer page. Image: Hatton Systems; used by permission.

History

According to its company history, Hatton Systems Ltd was founded in 2006 and works with vehicle manufacturers, laboratories, component developers and universities. Its work spans design and manufacture as well as the support and modification of existing installations.

Dyno configurations and applications

Hatton describes 2WD and 4WD chassis dynamometers tailored to laboratory requirements rather than a fixed named model range. In one configuration a pair of rolls is joined by an AC motor, inverter and computer controller. The manufacturer describes road-load simulation and constant-speed and constant-force modes; other motor and roll layouts are available. Optional automatic wheel centring, guards and load-cell calibration depend on the project. Hatton chassis dynamometers.

Its page describes 48-inch rollers for emissions work and larger 63-inch rolls as an option for sustained higher-power mileage accumulation. The same site discusses fuel-consumption, emissions and component-development testing. These are examples of configurations, not interchangeable ratings for every machine.

Controllers, repair and upgrades

Computer control commands the electric drive and monitors the installation; the public product page does not identify a universal model name for the controller. Its service page describes mechanical, electrical and control upgrades, charting and data logging, and conversion from mechanical flywheel inertia to full electrical inertia simulation. It names experience with other makes including Schenck, Hofmann, Froude, Brush and MRW Systems. Clarify whether a proposed job is calibration, repair, retrofit or a full mechanical rebuild.

Ask for the specific machine's load/speed envelope, applicable calibration certificate and scope, installation requirements and acceptance test.

Related: Dynamometers · Manufacturers and suppliers · UK rebuilders and refurbishment.