Haldex is a family of on-demand all-wheel-drive couplings. In a common transverse layout the front wheels are driven through the transaxle, a take-off drives a prop shaft, and a wet multi-plate clutch at the rear axle controls the torque passed to the rear final drive. Hydraulic pressure squeezes the clutch plates together. In electronically controlled systems the controller can request engagement as driving conditions change. BorgWarner Gen V overview
Identify the coupling
Record the VIN, build date and coupling or pump part number. Check all three against the vehicle and supplier documentation before selecting fluid, a pump or a service kit. BorgWarner describes a Gen V centrifugal pump that takes over functions previously handled by an accumulator, filter and pressure-control valve. Service parts and procedures vary by generation and application. Check whether the rear differential has a separate lubricant specification. BorgWarner coupling parts and service kits
Common faults and checks
- Weak or absent rear drive. Read faults from the AWD controller and check pump supply, wiring and commanded operation using the vehicle’s test plan. Inspect fluid level, leaks and any specified filter or pump inlet screen before condemning the clutch.
- Chatter or binding. Check tyre fitment and pressures, fluid specification and whether the symptoms occur during cornering or under load. Inspect prop-shaft joints and rear axle components for similar symptoms.
- Warning or communication fault. Record codes and check power, grounds, network communication and relevant wheel-speed faults before replacing parts.
Use the vehicle-specific service procedure for filling and any required pump activation or learning after service. BorgWarner pump, filter and oil references
For the main drivetrain layouts, see Transfer boxes: types, common faults and the LT230.