A gearbox changes the relationship between engine speed and road speed. A lower gear multiplies torque more for moving off or climbing. A higher gear allows lower engine speed at a given road speed. The final drive adds its own reduction downstream. In a transaxle, the gearbox and final drive share an assembly.
Main transmission types
- Manual. The driver selects a gear and operates the clutch. Synchronisers commonly match speeds during the shift.
- Torque-converter automatic. A converter transfers drive from the engine and may lock under suitable conditions. Control valves and clutches select the ratios in many conventional designs.
- Automated manual and dual clutch. An automated manual uses actuators to operate the clutch and choose gears. A dual-clutch transmission uses two clutches for two gear paths, allowing the next gear to be preselected.
- Continuously variable transmission. A conventional belt or chain CVT changes ratio by varying the effective diameter of its pulleys. Some hybrids use different mechanisms under the e-CVT name.
ZF transmission diagnosis and design overview · ZF dual-clutch system description · Toyota Direct Shift-CVT
Where to start with a fault
Identify the fitted gearbox from its tag or manufacturer data and record the controller identification if present. For harsh shifts, slip or delayed engagement, record whether it happens cold or hot, the affected gear and the load. Check fault codes and follow the unit-specific fluid and diagnostic checks before attributing the problem to the gearbox itself. A worn clutch, dual-mass flywheel or fault elsewhere in the drivetrain can produce similar symptoms. ZF transmission diagnosis guidance