Tuning Wiki

Ford MS-CAN is a 125 kbit/s body network on applicable platforms. Where it is exposed directly at the diagnostic connector, CAN-H is on pin 3 and CAN-L on pin 11. Confirm the bus and routing for the vehicle before interpreting module addresses. An address can recur on another Ford architecture.

Tester · DLC pins 3 / 11, 0x726 → read request, Body module. Tester, ← 0x72E · reply, Body module. Passive capture, 0x3B5 · TPMS broadcast, Selected Escape / Mariner
Ford MS-CAN diagnostic and broadcast traffic. Original Tuning Wiki diagram.

CAN identifiers

11-bit CAN IDRoleEvidence
0x3B5Tyre-pressure broadcastReported on selected Escape/Mariner configurations by the FDIM project.
0x726Tester requestBody-module tyre-pressure reads in the Ford Focus OBDb definitions.
0x72EModule replyPaired with the tester request in the same definitions.

Example read-only diagnostic requests

The Focus definitions list the following service 0x22 reads. The CAN bytes shown are normal-addressing ISO-TP Single Frames before padding. The leading 03 counts the three diagnostic bytes. These are community definitions with model-year filters. Use the vehicle wiring and a capture to confirm the physical bus for the Focus variant.

ReadRequest on 0x726Positive payload prefix on 0x72E
Front-left tyre pressure03 22 28 1362 28 13
Front-right tyre pressure03 22 28 1462 28 14

The Escape/Mariner broadcast and Focus diagnostic reads come from separate sources and applications.

Related references

Sources