Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

FiTech 30008 Mean Street 800 HP EFI System is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech identifies this as a square-bore, four-barrel replacement system with an electronic controller, injectors and fuel pressure regulation. The handheld controller is a setup and display device; confirm actual components supplied in the specific kit.

FiTech 30008 throttle-body EFI
FiTech’s product image for 30008; kit contents and finish should be checked against the exact part number. Source: FiTech product listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30008 specifications.

ItemManufacturer listing
FiTech model30008
Manufacturer maximum power800 HP
Mounting flange4-barrel square bore
ECU includedYes
Throttle-body finishSatin black
Fuel pump included in listed base kitNo

Source discrepancy: FiTech’s throttle-body range page describes Mean Street as having timing control, while the 30008 product specification lists timing control as “No” and power-adder compatible as “Yes”. Its 30008 instructions describe the six-wire harness and a nitrous-related use of the A/C input. Confirm timing, boost and wire functions for the actual hardware and software with FiTech.

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Customer harness wire reference

The FiTech 30008 installation instructions, pages 5–6, identify the customer harness by wire colour rather than numbered connector cavity. This does not document every ECU terminal. Check the exact ignition diagram and harness revision.

Wire or connectionManufacturer-described function
Large redBattery supply
WhiteSwitched ignition-on and cranking supply
Large orangeFuel pump positive supply
BlueEngine speed reference
BlackOptional A/C input when grounded; the manual also discusses nitrous use of this input
YellowFan 1 relay control
Yellow/black leadCoolant temperature sensor; separate lead
Oxygen-sensor cableWideband oxygen-sensor harness