FiTech 30001 Go EFI 4 600HP System is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech identifies this as a square-bore, four-barrel replacement system with an electronic controller, injectors and fuel pressure regulation. The handheld controller is a setup and display device; confirm actual components supplied in the specific kit.

Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30001 specifications.
| Item | Manufacturer listing |
|---|---|
| FiTech model | 30001 |
| Manufacturer maximum power | 600 HP |
| Mounting flange | 4-barrel square bore |
| ECU included | Yes |
| Throttle-body finish | Polished |
| Fuel pump included in listed base kit | No |
| Timing control, manufacturer listing | Yes |
| Power-adder compatible, manufacturer listing | No |
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Customer harness wire reference
FiTech’s Go EFI installation instructions, revision 18 June 2024, include this model and show Harness A and the four-plus-two customer connector on pages 5–6. This is a wire-colour reference; the source does not assign numbered connector cavities. Follow the appropriate ignition diagram for the actual installation and verify the hardware version.
| Wire or connection | Manufacturer-described function |
|---|---|
| Large red | Battery supply |
| White | Switched ignition-on and cranking supply |
| Large orange | Fuel pump positive supply |
| Blue | Engine speed input when timing control is not used |
| Black | Coil trigger when timing control is used |
| Yellow | Fan 1 relay control |
| Yellow/black lead | Coolant temperature sensor; separate lead from throttle body |
| Violet / green pair | Magnetic pickup positive / negative when using timing control |
| Oxygen-sensor cable | Wideband oxygen-sensor harness |