Electromagnetic fault injection (EMFI) uses a short, controlled electromagnetic pulse from a positioned probe to disturb a microcontroller at a particular moment. In ECU work, a supported programmer can use the resulting temporary fault as part of a boot-unlock or access procedure and then read or write the unit using its own protocol.
This is sometimes loosely called RF or electromagnetic glitching. The relevant term in the tool documentation here is EMFI or EMP glitch: it describes a deliberately induced local fault, not a normal radio communication link. Magicmotorsport: MD1CS003 with Korhex; Flashtec: EMP Glitch supported ECU list.
How it differs from a voltage glitch
A voltage glitch deliberately disturbs an electrical connection; an EMFI probe couples a pulse electromagnetically into a local area. Both are fault-injection techniques, and the tool still needs the correct ECU communications, power supply, timing, software and supported procedure. The pulse does not by itself edit a calibration. See ECU boot glitching and voltage fault injection.
The probe does not have to make an electrical connection to the silicon, but this does not mean that every procedure can be done with the ECU sealed. Access to the board or a specific area of the casing, positioning jigs and exact probe alignment can be required. The method, preparation and recovery procedure depend on the controller and equipment.
Workshop tools and examples
- Magicmotorsport Korhex with Flex: Flex 8.23.0.0 lists Boot Glitch by EMFI for Stellantis MD1CS003 TC298. Magicmotorsport specifies an F positioning mask and the Boot Glitch or Full licence, and says its Korhex route avoids removal of components in this application. It describes subsequent Bench programming. Manufacturer announcement.
- Flashtec CMDFlash offers an EMP Glitch solution and lists Citroën and Fiat MD1CS003 TC298 among supported controller types. Equipment, plugin and positioning-mask requirements are ECU-specific; Flashtec's release notes describe dedicated pulse hardware for its EMP procedures. Its separate mail-in service is another option. Flashtec ECU list; Tuning.Wales supplier-method summary.
- Alientech KESS3 has a separate Unlock Module and Boot Unlock for selected MD1CS003 units. Alientech's public 3.50/3.51 announcements do not identify that module as the same EMFI method, so do not assume Korhex or CMDFlash hardware and procedures are interchangeable. Alientech 3.50.
Planning the job
Confirm the full ECU identification, software, tool coverage, licence, preparation, backup and recovery before starting. An electromagnetic probe avoids some direct component handling in the procedures described by its maker, but an unsuitable pulse, poor placement, incorrect preparation or failed programming can still damage or disable an ECU. The term “unlocked” describes the access made available by the chosen procedure and does not guarantee that all later tools can use the unit.