Tuning Wiki

Part of the supercharger types and Eaton model guide.

What it is

The R410 is a compact TVS R-series air mover. Eaton describes variants for single or compound boosting and some fuel-cell airflow duties; the intended duty and housing need to be identified before using a unit on a road engine.

SpecificationDetail
Rotor familyTVS R-series Roots-type; four-lobe, 160-degree twist in Eaton's specification
Nominal supercharger displacement410 cm³ = 0.410 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Nissan Micra DIG-S, 2011 European launch1.2 L HR12DDR three-cylinderNissan confirms the supercharged engine and an Eaton press release identifies TVS in the Micra. R410 is commonly reported for this application, but the exact R410 designation is not established by those manufacturer sources; verify the unit label.Nissan; Eaton press release mirror
Volvo S60 and XC60 T6 Drive-E, 2015 model year2.0 L Drive-E inline-fourFactory supercharger-and-turbo combination. Volvo confirms it developed the clutch-operated supercharger with Eaton; the specific R410 designation still needs confirmation from the unit or an original application document. Other T6 engines can have different induction systems.Volvo Drive-E technology; Volvo S60 2015.5; Volvo XC60 2015.5

Design and application

An electromagnetic clutch is compatible with certain R410 configurations, according to Eaton; compatibility is not proof that a particular donor has the same clutch or control. R410 and V400 have different rotor series despite similar-looking names.

Identification, maintenance and upgrades

Check the exact ID, outlet configuration, clutch and electrical control, mounting, bypass and lubrication before adapting a donor. A small rotor pack is not automatically a safe or effective match for any specific engine.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources