Tuning Wiki

Part of the supercharger types and Eaton model guide.

What it is

Eaton introduced the R3100 rotor family for aftermarket applications in 2020. It uses a high-twist four-lobe layout developed from the R2650, and the complete housing and manifold are supplied by an aftermarket system manufacturer.

SpecificationDetail
Rotor familyTVS high-twist four-lobe Roots-type rotor family
Nominal supercharger displacementApproximately 3.1 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Custom hot rods and swaps with compatible GM LS3-style headsGM LS3/LSA-style V8 applications; LS3/LSA are 6.2 LAftermarket Magnuson M.O.A.B. TVS3100 kit; intended for custom installations and requires the specified drive and clearance.Magnuson M.O.A.B. kit

Design and application

The kit example is a custom installation, not a claim that a production LS3 car originally left the factory with an R3100. Eaton says partners may use the rotor pack in their own housings; packaging, bypass and charge-cooler design therefore depend on the kit.

Identification, maintenance and upgrades

Check bonnet clearance, drive alignment, custom belt/cog-drive requirements, cooling capacity and calibration. Eaton's 2020 announcement and the current kit specify this product family; use the supplier's exact specifications for a particular system.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources