Tuning Wiki

Part of the supercharger types and Eaton model guide.

What it is

The R2650 is a 2.65-litre-per-revolution TVS rotor family. Eaton describes a 170-degree rotor twist and identifies the unit on the 2020 Shelby GT500's 5.2-litre V8.

SpecificationDetail
Rotor familyTVS R-series Roots-type; four-lobe, 170-degree twist
Nominal supercharger displacement2,650 cm³ = 2.650 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Ford Mustang Shelby GT500, 20205.2 L supercharged V8Factory R2650. Eaton identifies this specific car and engine.Eaton GT500 announcement
Chevrolet Camaro SS LS3/L99, 2010–20156.2 L LS3 or L99 V8Aftermarket Magnuson Magnum TVS2650 system for the listed applications; not factory fitment.Magnuson application listing

Design and application

Eaton quotes a 170-degree twist and a larger displacement than its 2.3-litre R2300. Larger displacement does not mean that an R2650 is a direct swap into an R2300 application or will deliver a specific gain without matching the rest of the system.

Identification, maintenance and upgrades

For an upgrade, confirm manifold and bonnet clearance, pulley offset, fuel capacity, charge-cooler system and ECU calibration. Different sources publish different limits for different configurations: use the rating for the exact assembly.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources