Tuning Wiki

Part of the supercharger types and Eaton model guide.

What it is

The R1740 is a 1.74-litre-per-turn TVS rotor family. GM identifies its LT4 supercharger as an Eaton R1740, commonly rounded to 1.7 litres.

SpecificationDetail
Rotor familyTVS R-series Roots-type; four-lobe, 160-degree twist
Nominal supercharger displacement1,740 cm³ = 1.740 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Chevrolet Camaro ZL1, LT4-equipped example6.2 L (6,162 cm³) LT4 V8Factory supercharged engine; GM's engine specifications name both R1740 and Camaro ZL1.GM LT4 specifications
Chevrolet Corvette Z06 C7, 2015–20196.2 L LT4 V8GM identifies the LT4-powered C7 Z06; GM's LT4 specification separately identifies R1740. Assembly details can vary by vehicle.GM Corvette history; GM LT4

Design and application

The LT4 is a useful reminder that rotor size alone does not rank an entire system: GM matched a smaller nominal blower than the LS9's 2.3-litre unit to a different engine, drive and cooling package. Compare full operating points, not only displacement.

Identification, maintenance and upgrades

Inspect the dedicated charge-cooling circuit, bypass and belt drive as well as the compressor. Use the exact engine and supercharger assembly limits; do not apply a generic TVS speed limit to every production variant.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources