Tuning Wiki

Part of the supercharger types and Eaton model guide.

What it is

The R1320 is a nominal 1.32-litre-per-revolution TVS rotor family. It is used in certain production Audi 3.0 TFSI V6 applications and in aftermarket systems for other engines; the housing and installation are not interchangeable merely because the rotor size matches.

SpecificationDetail
Rotor familyTVS R-series Roots-type; four-lobe, 160-degree twist
Nominal supercharger displacement1,320 cm³ = 1.320 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Audi S4/S5 and selected A6/A7/Q5/Q7 3.0 TFSI variants3.0 L EA837 supercharged V6Factory Eaton 1320. Eaton's authorised service partner lists these models; exact engine variant, year and part number must be checked.Superchargers Online
Audi S4 2010–2017 and S5 2013–2017, specified B8/B8.5 3.0 TFSI3.0 L supercharged V6034Motorsport identifies the TVS1320 and the fitment range for its pulley application.034Motorsport application list
Toyota 4Runner 2010–2019 and FJ Cruiser 2010–20144.0 L 1GR-FE V6Aftermarket Magnuson TVS1320 system for the stated vehicles; not a claim of factory fitment.Magnuson system

Jaguar and Land Rover 3.0 V6: specialist sources use different R1320 and R1900 identifications for 3.0-litre applications. Powerhouse identifies an AJ126 example as R1320, while High Speed Lab lists specific 3.0 V6 units as TVS1900. This may reflect different applications or identification practices; the sources do not establish one universal model. Check the actual assembly and part number before selecting parts.

Design and application

Audi's integrated inlet and charge-cooler assembly is application-specific, while the Toyota example is a complete aftermarket kit. A 1.32-litre blower is not a 1.32-litre engine, and the presence of ‘T’ in 3.0 TFSI does not establish a turbocharger on these supercharged variants.

Identification, maintenance and upgrades

Check intake and charge-cooler leaks, bypass operation, drive coupling and pulley/belt condition. Later supercharged Audi assemblies can have different clutch and drive arrangements, so match the engine code and part number before ordering.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources