Part of the supercharger types and Eaton model guide.
What it is
The R1040 is an Eaton TVS R-series design with a nominal 1.04-litre swept volume per rotor revolution. Eaton describes use in single or compound systems and lists possible axial or radial outlet arrangements.
| Specification | Detail |
|---|---|
| Rotor family | TVS R-series positive-displacement Roots-type |
| Nominal supercharger displacement | 1,040 cm³ = 1.040 L / rotor revolution |
Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.
Cars, engines and examples
These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.
| Vehicle and period | Engine displacement and type | Installation and identification | Evidence |
|---|---|---|---|
| Named production-car fitment | Engine not independently verified | Eaton's model page describes the R1040 but does not name a specific car or engine in the cited material. Treat an advertised vehicle fitment as unconfirmed until its part number and application are checked. | Eaton R1040 |
Design and application
Eaton positions this unit among several R-series sizes; rotor displacement is only one part of choosing a compressor. Inlet/outlet layout, manifold, speed ratio, efficiency map and control must match the system.
Identification, maintenance and upgrades
Ask the supplier for the particular R1040 unit's application drawing, rotor/input ratio, bypass and temperature limits. Some Eaton catalogues describe optional features, not equipment present on every unit. No factory car fitment is asserted here without an application source.
Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.
Sources
- Eaton R1040 product specification. Accessed 2026-11-14.
- Eaton historical TVS family presentation. Accessed 2026-11-14.