Tuning Wiki

Part of the supercharger types and Eaton model guide.

What it is

The M90 displaces approximately 1.475 litres per blower rotation. It appears in Ford and Jaguar six-cylinder applications and later supercharged GM 3800 applications; these are different installations, not a single bolt-on part.

SpecificationDetail
Rotor familyM-series Roots-type, with multiple generations and application-specific castings
Nominal supercharger displacement90 in³ ≈ 1.475 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Ford Thunderbird Super Coupe, 1989–19953.8 L Essex V6Factory intercooled 90-cubic-inch Eaton blower; Ford identifies the period and size.Ford engine history
Jaguar XJR X300, 1995 model year4.0 L AJ16 inline-sixFactory Eaton M90 with Jaguar-specific mounting and charge cooling.Jaguar 1995 XJ technical guide
Pontiac Grand Prix GTP, 20033.8 L GM 3800 Series II L67 V6GM identifies the supercharged engine; Magnuson lists GM 1996–2004 M90 cores. The pairing follows the two sources together.GM manual; Magnuson catalogue

Design and application

Ford, Jaguar and GM units differ in inlet orientation, drive length, mounting and bypass details. Even GM 3800 generations need individual identification; earlier supercharged 3800 engines were not necessarily M90-equipped. Compare the casting and full part number.

Identification, maintenance and upgrades

Inspect rotor tips and case for contact, check pulley and coupling condition, and check for air leaks or a sticking bypass. The Thunderbird is intercooled; do not assume all M90 installations use the same cooler or plumbing.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources

HP Tuners Grand Prix GTP example

See 2004 Grand Prix GTP 3.8 knock, fuelling and 4T65-E logging for vehicle identification and qualified community discussions.