Tuning Wiki

Part of the supercharger types and Eaton model guide.

What it is

The M62 has a nominal swept volume of about 1.016 litres per rotor revolution. GM's 2007 Saturn service description identifies its M62 as a fifth-generation three-lobe Roots design with an integrated bypass. Other M62 applications differ.

Eaton MP62 Roots-type supercharger in a Stillen-badged installation.
Eaton MP62 example in a Stillen-badged installation; the housing is not identified as the GM or Lotus assembly. Photo: Tennen-Gas, Wikimedia Commons, CC BY-SA 2.5; unchanged from the Commons file.
SpecificationDetail
Rotor familyM-series Roots-type; three-lobe rotors in the documented GM fifth-generation example
Nominal supercharger displacement62 in³ ≈ 1.016 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Chevrolet Cobalt SS Supercharged, 20052.0 L Ecotec LSJ inline-fourFactory M62 with air-to-water charge cooling; GM specifies the blower for this model.GM Cobalt information
Saturn ION Red Line, 20072.0 L supercharged Ecotec inline-fourGM's 2007 ION service material names the M62 and describes its bypass and intercooler.GM ION service information
Lotus Sport Exige 240R1.8 L Toyota 2ZZ-GE inline-fourLotus names the M62 for this limited model, with a roof-fed air-to-air intercooler.Lotus 240R press release
Nissan Xterra SE and Frontier S/C, 20033.3 L supercharged V6Nissan confirms an Eaton-developed Roots blower; Magnuson lists 2002–04 Nissan M62 cores. The M62 pairing is inferred from both sources: check the exact part number.Nissan; Magnuson

Design and application

Cobalt/ION and Lotus use different intake, cooling and drive arrangements even with the same nominal rotor size. GM describes the ION unit's three-lobe, 60-degree-twist rotors, integral bypass and self-contained lubrication; do not treat those details as universal for every M62.

Identification, maintenance and upgrades

Inspect the charge cooler, belt and bypass as a system. Listen for input-drive or bearing noise and look for rotor-to-case damage. A pulley or porting change needs assessment of airflow, inlet temperature, fuel supply and calibration.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources