Tuning Wiki

Part of the supercharger types and Eaton model guide.

What it is

The M112 is an Eaton positive-displacement Roots-type blower used on specific Ford and Jaguar V8s. The same nominal rotor volume can be packaged in very different inlet, intercooler and drive assemblies.

Engine bay of a 2003 Ford Mustang SVT Cobra with a supercharged 4.6-litre V8.
Example 2003 Mustang Cobra engine bay; the photographed vehicle may have been modified. Photo: Stephen Foskett, Wikimedia Commons, CC BY-SA 3.0; unchanged from the Commons file.
SpecificationDetail
Rotor familyM-series Roots-type; 112-cubic-inch nominal rotor group
Nominal supercharger displacement112 in³ ≈ 1.835 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
Ford Mustang SVT Cobra, 2003–20044.6 L Modular DOHC V8Factory M112; Ford documents the 4.6 Eaton application and VMP identifies the original blower.Ford; VMP
Ford F-150 SVT Lightning, 1999–20045.4 L Modular SOHC V8Ford identifies the Eaton Roots installation; Magnuson identifies Lightning M112 cores.Ford; Magnuson
Jaguar XKR and XJR, 1998 launch4.0 L supercharged AJ-V8Jaguar's launch information names the M112 and twin liquid intercoolers.Jaguar XKR launch
Jaguar XJR and Super V8, 2009 model year4.2 L (4,196 cm³) supercharged V8Jaguar identifies the Eaton M112 and twin air-to-liquid intercoolers.Jaguar XJ specifications

Design and application

Do not confuse the Eaton M112 blower with the unrelated Mercedes-Benz M112 engine family. Jaguar's 4.0 and 4.2 applications and Ford's 4.6 and 5.4 applications show why engine and blower displacement must be listed separately.

Identification, maintenance and upgrades

Check casting, nose length, pulley position, bypass and cooler interfaces against the donor. A Jaguar M112 is not simply a Ford M112 with the same part number. Inspect rotor coating, drive noise, belt slip and cooler leaks before increasing speed.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources