These allocations are from the Davis Technologies TMS-Drag-Lite-MAP manual, printed pages 8–9. The power, sensor and output plugs are separate connectors; both three-pin plugs use A/B/C but have different functions. Do not transfer this to other TMS or TC-3 hardware.
Two-pin power input
| Terminal | Wire | Function |
|---|---|---|
| A | Red | 12 V positive |
| B | Black | 12 V ground |
Three-pin driveshaft sensor connector
| Terminal | Wire | Function |
|---|---|---|
| A | Red | Sensor positive, 12 V |
| B | Black | Sensor ground |
| C | White | Sensor signal wire |
The manual scopes these colours to Davis-supplied sensors and asks users to check other sensors with their maker. Connector lettering is specific to this plug.
Three-pin output connector
| Terminal | Wire | Function |
|---|---|---|
| A | Green | MAP signal to ignition controller |
| B | Black | MAP ground to ignition controller |
| C | Pink | Correction indication, +12 V output through a 1 kilohm resistor |
The manual separately labels the mating ignition MAP sensor plug A as ground and B as signal, the reverse letter mapping from this output plug. Identify each connector before use. Davis Technologies TMS-Drag-Lite-MAP manual, pages 8–9.